Corn Flakes Small Machine-manufacture,factory,supplier from China

1. Before operating the corn equipment bulking machine, remove the head, movement, lead screw and other parts, clean them up, dry them and then install them.2. Idling for 1 to 2 minutes first when operating, put the raw materials into the feed mouth, not too fast, when the ring groove of the spiral shaft head is filled, stop feeding, friction preheating. Wait until the nose temperature rises and the pressure inside the cabin builds up before feeding.3. Feed should be continuous and uniform, material must be dry, must pay attention to.4.

As people are more and more striving to catch up with the trend of health and wellness, more and more whole grains are coming to the family table, becoming a delicacy with a strong presence in the three meals a day. With the support of drying technology, maturation technology and modern production equipment, cereals represented by millet also speed up the process of instant food.

　　The products produced by the breakfast cereal production line are a brittle food with a smooth taste and a strong grain flavor. Breakfast cereal corn flakes are processed by a special structured extruder, which further improves yield, quality, and raw material adaptability compared to traditional production methods, making it possible to strengthen trace elements such as vitamins and minerals. This production line has the characteristics of multiple optional models, flexible equipment configuration, wide range of raw materials, multiple product types, and simple operation.

As a food processing equipment, the food extruder has many precautions in use. For example, we need to remove the machine head, movement and lead screw before starting the operation, and we must carefully clean the rice on the machine. dirt and oil, and then re-installed. Only in this way can the material reach the required state and quality. So in the process of Jinan puffing extrusion equipment operation, what should we pay attention to?Matters needing attention during the operation of the extruder are:1. Mainly use corn and potatoes as raw materials to produce small food.2.

Corn chip is a kind of brittle food, with good rehydration, external flushing not rotten, smooth taste, grain flavor rich.

The screw extruder was first used in the plastics industry, and its theoretical research started earlier, forming a variety of mathematical models used to describe the basic principles of flow and heat transfer in the extrusion process, using these models to achieve accurate extrusion machine simulation Design. The application of extrusion technology in the food industry is slightly later than that in the plastics industry, which is mainly due to the complexity of food raw materials.

In recent years, with the improvement of people's living standard and the acceleration of work and the pace of life, small food machinery plays a more and more important role in the life, not only urban residents buy one after another, convenient to eat, and along with the expansion of the demand of the reemployment market, some laid-off workers can invest to buy this small food machinery for reemployment, and at the same time, as our country's accession to WTO, These small food machines can be transported across the ocean to facilitate the work and life of foreigners.So how to develop

The following five food production lines are introduced.1. Puffed small food production lineThe puffed food machinery uses flour, corn starch, tapioca starch, potato starch, potato whole wheat flour, etc. as raw materials, and is extruded into various shapes of billets, and then dried, fried, and seasoned to become fine and crispy in taste and smooth in surface. , Leisure puffed food with high shape reduction degree.2.

Twin screw extruder is developed on the basis of single screw extruder. Two screws are placed side by side in the barrel of the twin screw extruder. According to the meshing degree of the two screws can be divided into mutual meshing type and non-meshing type. According to the rotation direction of the two screw shafts, it can be divided into reverse rotation type and co-rotation type.(1) meshing twin screw: Because the meshing gap of the meshing screw is very small, the material has the ability of forced conveying, not easy to produce backflow, leakage phenomenon.

With the needs of daily life, extruders are widely used, and can be divided into four areas: drainage area, feeding area, screw conveying area and discharging area.1. The equipment adopts a shaftless screw, and the contact area with the material is small, that is, the friction force is small, which can effectively improve the extrusion efficiency of the extruder, and can avoid problems such as clogging and winding.2. The equipment is made of stainless steel, which has high strength and strong corrosion resistance, so it has a long service life.3.